- Intelligent SATCOM Terminal
- Smart SATCOM Terminal
- Portable SATCOM Terminal
- Excellent SATCOM Terminal
- Vehicle SATCOM
- Medium-sized SATCOM
- Large SATCOM Command Vehicle
- Compact Ship SATCOM Terminal
- Practicus Air SAT Terminal
- Satellite IoT Monitoring Station
- FDMA SATCOM Modem
- FDMA SATCOM Hub Modem
- TDMA SATCOM Modem
- TDMA SATCOM Hub Modem
Intelligent SATCOM Terminal
35C is compact SATCOM terminal with 0.35m aperture, assemble-free parabolic antenna, and can be deployed, aligned, and connected within 1 minute.
- One button start
- Voice assistance
- Support Ku-band high-throughput satellite
- Apply spread spectrum
- 2 hours continuous use powered by internal battery
- 6kg (with battery)
FEATURES
Smart SATCOM Terminal
50B is a SATCOM terminal - 0.5m parabolic antenna.
- One button start
- Voice assistance
- Support Ka-band high-throughput satellite
- 4 hours continuous use powered by internal battery
- 10kg (with battery)
FEATURES
PortaЫe SATCOM Terminal
60С fully portaЫe SАТСОМ - 0.6m aperture parabolic antenna, there is no need to assemЫe,
and it supports one-key start. 60С can complete aiming satellite, entering network and building
chain within 2 minutes, it supports voice broadcast function, and it's portaЫe and easy to use.
lt is based on Ku band for communication, with а maximum service rate of 50Mbps, which get it
with rich bandwidth resources, low communication costs, and it's аЫе to access to emergency
networks and domestic high-throughput. The device has а built-in battery, it takes full
consideration of windproof, high and low temperature, and low power consumption, and the working time is not less than 4 hours.
and it supports one-key start. 60С can complete aiming satellite, entering network and building
chain within 2 minutes, it supports voice broadcast function, and it's portaЫe and easy to use.
lt is based on Ku band for communication, with а maximum service rate of 50Mbps, which get it
with rich bandwidth resources, low communication costs, and it's аЫе to access to emergency
networks and domestic high-throughput. The device has а built-in battery, it takes full
consideration of windproof, high and low temperature, and low power consumption, and the working time is not less than 4 hours.
- lnnovative structure design, no need to assemЬle
- Satellite Alignment Тime less than 2 mins
- Dual-mode modem
- Voice Ьroadcast function
60С PortaЫe SАТСОМ Terminal
- Many components, difficult to install and use
- 3- 5mins
- Dual-mode modem unavailaЫe{most)
- Voice broadcast function unavailaЫe
Common PortaЫe SАТСОМ Terminal
Excellent SATCOM Terminal
80C is a SATCOM terminal - 0.8m antenna.
- User-friendly design
- Voice assistance
- Support Ku-band high-throughput satellite
- 4 hours continuous use powered by internal battery
- 14kg (with battery)
FEATURES
Vehicle SATCOM
608/808 Vehicle SATCOM is designed to meet the demands of high-speed data transmission
and СОТМ when abrupt disaster happens. The Satellite Antenna, 8UC and SATCOM Modem are
all integrated inside the Radome. Wi-Fi access is provided for the user to do wireless control
and data transmission. The equipment has low requirement for vehicle modification, which can
solve the general proЫems caused Ьу the installation difficulty and insufficient interior space.
and СОТМ when abrupt disaster happens. The Satellite Antenna, 8UC and SATCOM Modem are
all integrated inside the Radome. Wi-Fi access is provided for the user to do wireless control
and data transmission. The equipment has low requirement for vehicle modification, which can
solve the general proЫems caused Ьу the installation difficulty and insufficient interior space.
- lntegrated design, 0% interior space taken
- Low vehide modification requirement
- Wi-Fi interface provided
60В/80В Vehicle SATCOM Terminal
- Most space occupied Ьу equipment
- Complex design for internal equipment
- No Wi-Fi interface
Common Vehicle SATCOM Terminal
Medium-sized SATCOM
120A is a SATCOM vehicle with a 1.2-meter satellite antenna, high-speed satellite
modem and a video conferencing system. Using the vehicle's small conference room and
video conferencing system, the site commander can conveniently study and dispose of the
emergency, and always keep in touch with the HQ, timely exchange of information to ensure
that the disposal process is efficient and accurate.
modem and a video conferencing system. Using the vehicle's small conference room and
video conferencing system, the site commander can conveniently study and dispose of the
emergency, and always keep in touch with the HQ, timely exchange of information to ensure
that the disposal process is efficient and accurate.
- Designed for communication command
- High communication bandwidth, support transmission of multi-channel HD video
- Automatic satellite aiming, automatic network entry, rapid turn-up
- Satellite communication function only
- Insufficient communication capacity and difficulty in supporting multiple applications
- Cumbersome operation for satellite aiming and network entry, long opening time
Common SATCOM Vehicle
120A SATCOM Vehicle
Large SATCOM Command Vehicle
90B SATCOM command vehicle is a powerful mobile command and dispatch system,
using special large vehicle as the bearing platform, equipped with satellite, 4G,
self-assembled network and other communication means, configured with a complete video command system, it can provide ample meeting space. In the process of vehicle travel, the satellite communication in motion system provides an uninterrupted communication link with the HQ for the personnel accompanying the vehicle.When the vehicle arrives at the operation site, 90B quickly becomes the local command center, and guarantees the local communication between the on-board commander and the field operation crew through 4G or self-organized network, and guarantees the communication between the on-board commander and the rear remote with the help of the SATCOM system. In addition, the ample meeting space inside the vehicle and the perfect video command system can ensure the commander to make effective collective decisions and on-site command and dispatch.
using special large vehicle as the bearing platform, equipped with satellite, 4G,
self-assembled network and other communication means, configured with a complete video command system, it can provide ample meeting space. In the process of vehicle travel, the satellite communication in motion system provides an uninterrupted communication link with the HQ for the personnel accompanying the vehicle.When the vehicle arrives at the operation site, 90B quickly becomes the local command center, and guarantees the local communication between the on-board commander and the field operation crew through 4G or self-organized network, and guarantees the communication between the on-board commander and the rear remote with the help of the SATCOM system. In addition, the ample meeting space inside the vehicle and the perfect video command system can ensure the commander to make effective collective decisions and on-site command and dispatch.
- Rich communication means and smooth communication in any situation
- Highly integrated command dispatching and communication system
- Remote communication capability in driving condition
- Limited communication means, unable to guarantee full time domain communication
- Poor command dispatching and communication system, limited command dispatching capability
- Remote communication capability at rest only
Common SATCOM Command Vehicle
90A SATCOM Command Vehicle
Compact Ship SATCOM Terminal
- Integrated design, no external equipment
- Simple interface, easy to use and maintain
- User friendly control software
80B/100B Ship SATCOM Terminal
- External SATCOM modem required
- Complex interface design
- Difficult to use
Common Ship SATCOM Terminal
Practicus Air SAT Terminal
45B Air SAT terminal can be installed on UAVs to provide remote control
function and traffic channels for the carrier. The antenna can dynamically adjust its azimuth and pitch to accurately aiming the satellite during high-speed flight. The modem is responsible for modulating/demodulating transmitted/received signals.
This terminal has the characteristics of simple structure and easy installation. Video data
transmission, remote sensing data backhaul and other communication services are available by receiving control signals from system control center. It can solve the common problems such as remote control and broadband data transmission in UAV applications.
function and traffic channels for the carrier. The antenna can dynamically adjust its azimuth and pitch to accurately aiming the satellite during high-speed flight. The modem is responsible for modulating/demodulating transmitted/received signals.
This terminal has the characteristics of simple structure and easy installation. Video data
transmission, remote sensing data backhaul and other communication services are available by receiving control signals from system control center. It can solve the common problems such as remote control and broadband data transmission in UAV applications.
- Simple structure and convenient installation
- General external interface
- Under direct control of control center
- Complex structure, not suitable for UVA
- Complex interface design
- P2P only
Common Air SATCOM Terminal
45B Air SATCOM terminal
Stable and flexible Satellite IoT Monitoring Station
- Support dynamic allocation of time slots
- Support automatic power control
- Low power mode automatic switching
450A Satellite IoT Monitoring Station
- Does not support dynamic allocation of time slots
- Usually does not support automatic power control
- Single power consumption mode, does not support switching
Common SATCOM control terminal
45A satellite IoT monitoring station operates based on Ku band, which is less affected by
the environment. The communication cost is low, and it can realize unmanned autonomous
operation. The system adopts TDM/TDMA communication system, which is flexible in networking and convenient in expansion, and is suitable for satellite IoT data transmission. 450A type satellite IoT monitoring station adopts solar power supply, which can ensure normal operation in strong wind, high and low temperature, rain and snow and other harsh environmental conditions, and has the functions of real-time data return, remote control, real-time alarm, data transmission, etc.
the environment. The communication cost is low, and it can realize unmanned autonomous
operation. The system adopts TDM/TDMA communication system, which is flexible in networking and convenient in expansion, and is suitable for satellite IoT data transmission. 450A type satellite IoT monitoring station adopts solar power supply, which can ensure normal operation in strong wind, high and low temperature, rain and snow and other harsh environmental conditions, and has the functions of real-time data return, remote control, real-time alarm, data transmission, etc.
Fully Functional FDMA SATCOM Modem
- Configuration once for all
- Support P2P, Star/Mesh network
- General external interface
- Support shared services, multicast, extended bandwidth, etc.
30C FDMA SATCOM Modem
30C FDMA SATCOM Modem - to modulate and demodulate SATCOM signals. Modulation
and coding methods can meet international common standards and the algorithm is
implemented independently. It provides standard L-band interface as well as the feeding clock/ voltage for BUC and LNB. This equipment can support FDMA/SCPC communication system, provide RJ45 and Wi-Fi interface and accept centralized M&C. 1U standard case size makes it can be easily installed in central stations, fixed stations or special vehicles.
and coding methods can meet international common standards and the algorithm is
implemented independently. It provides standard L-band interface as well as the feeding clock/ voltage for BUC and LNB. This equipment can support FDMA/SCPC communication system, provide RJ45 and Wi-Fi interface and accept centralized M&C. 1U standard case size makes it can be easily installed in central stations, fixed stations or special vehicles.
- Complex configuration by using panel or Web
- Manual P2P
- Complex interface design
- Single function, difficulty in expansion
Common FDMA SATCOM Modem
Flexible and Strong FDMA SATCOM Hub Modem
- Compact Design Space Saving
- Multi Concurrency Channels Strong SATCOM Ability
- Module Function Dynamic Definition Flexible Configuration
M300C FDMA SATCOM Hub Modem
M30C SATCOM Hub Modem supports FDMA/SCPC communication system and adopts the
standard 4U chassis size. It supports 11 service boards, 1 system board, 2 switch boards and 2 CPCI power boards. Each service board has two duplexing channels that supports hot plug in. The channel function can be dynamically defined by software, which can be used for transmission of service data or transmission of control data. Users can flexibly configure it according to network scale and service needs. A M300C hub modem terminal with a size of only 4U can easily support up to 22 concurrent channels, which greatly reduces the space occupation of computer room for the SATCOM hub modem and effectively reduces the construction cost of the SATCOM hub modem.
standard 4U chassis size. It supports 11 service boards, 1 system board, 2 switch boards and 2 CPCI power boards. Each service board has two duplexing channels that supports hot plug in. The channel function can be dynamically defined by software, which can be used for transmission of service data or transmission of control data. Users can flexibly configure it according to network scale and service needs. A M300C hub modem terminal with a size of only 4U can easily support up to 22 concurrent channels, which greatly reduces the space occupation of computer room for the SATCOM hub modem and effectively reduces the construction cost of the SATCOM hub modem.
- Larger Volume Take Up More Space
- Limited Concurrency Channels Week SATCOM Ability
- Fixed Module Function Difficult for Service Changes
Common FDMA SATCOM Hub Modem
TDMA SATCOM Modem
- Forward & Retro access rate not less than 150Mbps/30Mbps
- Support QoS, TCP acceleration, data compression
- Support automatic beam switching
T50C TDMA Service Modem
T50C is a high TDMA system, central enterprises, maritime and emergency industries
with high speed Internet access or large scale private network networking. It adopts the international common standard, the algorithm is completely independent implementation, T50C provides the standard L-band interface, and provides the feeder clock and feeder support, convenient to connect BUC and LNB. The device supports TDM/MF-TDMA communication system and accepts the centralized management and control of satellite communication system control center, which is easy to operate and easy to use.
with high speed Internet access or large scale private network networking. It adopts the international common standard, the algorithm is completely independent implementation, T50C provides the standard L-band interface, and provides the feeder clock and feeder support, convenient to connect BUC and LNB. The device supports TDM/MF-TDMA communication system and accepts the centralized management and control of satellite communication system control center, which is easy to operate and easy to use.
- Forward&Retro access rate below 100Mbps/10Mbps
- QoS, TCP acceleration, data compression are usually not supported
- Manual beam switching
Common TDMA Service Modem
TDMA SATCOM Hub Modem
- Telecom-grade redundancy design, built-in modules are M:N backup
- Support ns-level very high precision system timing
- Support multi-beam access
- Total system bandwidth supports forward 1Gbps/retro 500Mbps
50C TDMA Hub Modem
50C high-speed TDMA SATCOM Hub Modem standard CPCI case structure. The central
station terminal is highly scalable, supports multiple user networks and up to three different
satellites or frequency bands. In addition, the central station terminal is based on the DVB-RCS2 standard and supports star, mesh, SCPC and hybrid satellite networks, which can be flexibly configured by users according to the network scale and service requirements, and is suitable for common satellite communication scenarios such as large-scale system networking and highspeed satellite Internet.
station terminal is highly scalable, supports multiple user networks and up to three different
satellites or frequency bands. In addition, the central station terminal is based on the DVB-RCS2 standard and supports star, mesh, SCPC and hybrid satellite networks, which can be flexibly configured by users according to the network scale and service requirements, and is suitable for common satellite communication scenarios such as large-scale system networking and highspeed satellite Internet.
- No backup, or external backup, less reliable and less flexible
- Usually not supported
- Usually not supported
- Usually low system bandwidth
Common TDMA Hub Modem